skrf.calibration.deembedding.IEEEP370_SE_ZC_2xThru.__init__

IEEEP370_SE_ZC_2xThru.__init__(dummy_2xthru, dummy_fix_dut_fix, name=None, z0=50, bandwidth_limit=0, pullback1=0, pullback2=0, side1=True, side2=True, NRP_enable=True, leadin=1, verbose=False, *args, **kwargs)[source]

IEEEP370_SE_ZC_2xThru De-embedding Initializer

Parameters:

  • dummy_2xthru (Network object) – 2xThru (FIX-FIX) network.

  • name (string) – optional name of de-embedding object

  • z0 – reference impedance of the S-parameters (default: 50)

  • bandwidth_limit – max frequency for a fitting function (default: 0, use all s-parameters without fit)

  • pullback1 – a number of discrete points to leave in the fixture on side 1 respectively on side 2 (default: 0 leave all)

  • pullback2 – a number of discrete points to leave in the fixture on side 1 respectively on side 2 (default: 0 leave all)

  • side1 – set to de-embed the side1 resp. side2 errorbox (default: True)

  • side2 – set to de-embed the side1 resp. side2 errorbox (default: True)

  • NRP_enable – set to enforce the Nyquist Rate Point during de-embedding and to add the appropriote delay to the errorboxes (default: True)

  • leadin – a number of discrete points before t = 0 that are non-zero from calibration error (default: 1)

  • verbose – view the process (default: False)

  • args – passed to Deembedding.__init__()

  • kwargs – passed to Deembedding.__init__()

See also

Deembedding.__init__()